|
|
 |
 |
|
 |
| |
 |
| HL Model |
-Spindle bore 80mm(3.12")
-Swing over bed 533mm(21") / 620mm(24")
-Length(mm) 2,000, 2500, 3000, 4000
-Taper attachment(Option) |
|
|
|
 |
 |
 |
 |
| SPECIFICATION |
HL 2000 |
HL 2500 |
HL 3000 |
HL 4000 |
| GENERAL |
| Swing over bed |
533 mm (21in) / 620 mm (24in) |
| Swing over cross slide |
340 mm (13.12in) / 427 mm (16.5in) |
|
Swing in gap (gap bed lathe) |
720 mm (28.12in) / 807 mm (31.5in) |
| Height from floor to work center |
1,040 mm (40.93in) / 1,088 mm (42.81in) |
|
Max distance between center |
2,032 mm (80in) |
2,536 mm (100in) |
3,130 mm (120in) |
4,150 mm (160in) |
| HEADSTOCK |
| Hole thru spindle |
80 mm (3.12in) |
| Spindle nose |
A1-8 or D1-8 |
| Number of speed changes |
12 |
| Range of spindle speeds |
25-1500 r.p.m. |
| GEAR BOX |
| Number of feed changes |
76 kinds |
| Range of feeds per revolution longitudinal |
in inch 0.003 - 0.0424
in metric 0.049 - 0.679 |
| Cross |
1/2 against longitudinal feed |
| THREADS |
| Leadscrew diameter and threads per inch |
35 mm (1.37in)
4 TPI (P= 6 mm) |
| Threading range whitworth |
4 to 56 TPI - 40 kinds |
| Mertic |
0.5 to 7 mm - 20 kinds |
| Module |
0.5 to 7M - 20 kinds |
| D.P. |
4 to 28 D.P - 19 kinds |
| CARRIAGE AND COMPOUND |
| Compound rest top slide travel |
110 mm (4.31in) |
| Cross slide travel |
360 mm (14.18in) |
| TAILSTOCK |
| Quill diameter |
80 mm (3.09in) |
| Spindle travel |
150mm (5.87in) |
| Center |
MT No. 5 |
| BED |
| Width of bed |
370 mm (14.5in) |
| MOTOR |
| Main drive motor |
7.5 HP / 10 HP (4P) |
| FLOOR SPACE |
| Floor space required Length x Width |
4,035mm x 950mm |
4,543mm x 950mm |
5,156mm x 950mm |
6,147mm x 950mm |
| WEIGHT |
| Net weight (approx.) |
2,870 KGS |
3,070 KGS |
3,400 KGS |
3,800 KGS |
|
 |
|
 |
|
 |
|
|
|
|
|
| Copyright ©2009 King Kong Iron Works, Ltd. All rights reserved. |
Contact Us|News|Sitemap|Total Visitor :    |
| Kingston is trading mark of king Kong Co. registered in US, Canada, Japan and Taiwan. |
Created by Aboutnic |
|
|
|
